Repair Manual

iPhone 12 mini
073-00290-A | 78© 2022 Apple Inc. All rights reserved.
1. Place the enclosure in the repair tray with the Lightning connector facing the cutout.
2. Use a torque driver and the
JCIS bit to remove the two
crosshead screws from the
Taptic Engine connector
cowling. Set aside the
screws.
4. Use a torque driver and the
super screw bit to remove
the super screw (1) from the
top of the Taptic Engine. Set
aside the screw.
5. Use a torque driver and the
Micro stix bit to remove the
trilobe screw (2) from the
bottom of the Taptic Engine.
Set aside the screw.
Removal
Taptic Engine | Removal
3. Use ESD-safe tweezers to remove the Taptic Engine connector cowling. Save the cowling for
reassembly.