Repair Manual

iPhone 12 mini
073-00290-A | 44© 2022 Apple Inc. All rights reserved.
Display I Reassembly
10. Remove the center section of
the top release liner first (1).
Then remove the three
sections running along the
bottom (2), right (3), and
top (4).
Don’t remove the middle
release liner strips yet.
Important
13. Press the ends of the
receiver flex cable (1) and
display flex cable (2) to the
connectors. Press evenly
along the length of each
connector.
11. Insert the suction cups into the repair tray.
12. Align the left edge of the
display with the left edge
of the enclosure as shown.
Gently press along the edges
of the display to secure it to
the suction cups.
14. Press the end of the battery
flex cable to the connector
(3). Press evenly along the
length of the connector.
Top release liner