Repair Manual

iPhone 12 mini
073-00290-A | 40© 2022 Apple Inc. All rights reserved.
Display I Reassembly
5. The replacement display
adhesive has a top release
liner, a middle release liner,
and a bottom release liner.
Grasp the tab from the
bottom release liner. Then
slowly pull the bottom
release liner (1) out from
under the adhesive (2) while
pressing the adhesive onto
the enclosure.
4. Align the replacement display adhesive over the enclosure with the top holes over the TrueDepth
camera assembly and the bottom tab on the left.
Ensure that you’ve removed all adhesive residue from the display and the enclosure before you apply
the replacement display adhesive.
Note: The replacement
display adhesive for your
model may look different
from the illustration, but the
steps are the same.
Caution
Don’t remove the top
release liner yet.
Important
Bottom release liner
Adhesive