User Guide
  Chapter 12 Camera  85
Take photos and videos
Camera oers several modes, which let you shoot stills, square-format photos, time-lapse, videos, 
and panoramas.
Choose a mode. Drag up or down, or tap the camera mode labels to choose Time-Lapse, Video, 
Photo, Square, or Pano.
Take a photo. Choose Photo, then tap the Take Picture button or press either volume button.
 •
Take Burst shots: (iPad Air 2) Touch and hold the Take Picture button to take rapid-re photos 
in bursts (available while in Square or Photo mode). The shutter sound is dierent, and the 
counter shows how many shots you’ve taken, until you lift your nger. To see the suggested 
shots and select the photos you want to keep, tap the thumbnail, then tap Select. The gray 
dot(s) mark the suggested photos. To copy a photo from the burst as a separate photo in your 
Bursts album in Photos, tap the circle in the lower-right corner of the photo. To delete the 
burst of photos, tap it, then tap  .
 •
Apply a lter: Tap   to apply dierent color eects, such as Mono or Chrome. To turn o a 
lter, tap  , then tap None. You can also apply a lter later, when you edit the photo. See Edit 
photos and trim videos on page 81. 
A rectangle briey appears where the exposure is set. When you photograph people, face 
detection (iPad 3rd generation or later) balances the exposure across up to 10 faces. A rectangle 
appears for each face detected.
Exposure is automatic, but you can set the exposure manually for the next shot by tapping an 
object or area on the screen. With an iSight camera, tapping the screen sets the focus and the 
exposure, and face detection is temporarily turned o. To lock the exposure and focus, touch 
and hold until the rectangle pulses. Take as many photos as you want. When you tap the screen 
again, the automatic settings and face detection turn back on.
Adjust the exposure. Tap to see   next to the exposure rectangle, then slide up or down to 
adjust the exposure.
Take a panorama photo. (iSight camera) Choose Pano, tap the Take Picture button, then pan slowly 
in the direction of the arrow. To pan in the other direction, rst tap the arrow. To pan vertically, rst 
rotate iPad to landscape orientation. You can reverse the direction of a vertical pan, too.










