Quick Reference Guide

Blasting Areas and Posted Facilities To avoid
interfering with blasting operations, turn o iPad
when in a “blasting area” or in areas posted “Turn o
two-way radio.” Obey all signs and instructions.
Certication and Compliance
See iPad for the certication and compliance marks
specic to that device. To view, choose Settings >
General > About > Regulatory.
Australia
New
Zealand
Model A1430
U.S. Model A1403
FCC ID: BCGA1403
Model A1430
FCC ID: BCGA1430
Canada Model A1403
IC: 579C–A1403 Meets ICES-003
Model A1430
IC: 579C–A1430 Meets ICES-003
EU Model A1403 and A1430
Japan
Singapore Model A1430
Important: Changes or modications to this product
not authorized by Apple could void the EMC and
wireless compliance and negate your authority to
operate the product. This product has demonstrated
EMC compliance under conditions that included the
use of compliant peripheral devices and shielded
cables between system components. It is important
that you use compliant peripheral devices and
shielded cables between system components to
reduce the possibility of causing interference to
radios, televisions, and other electronic devices.
FCC Compliance Statement
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment
and receiver.
 Connect the equipment to an outlet on a circuit
dierent from that to which the receiver is
connected.
 Consult the dealer or an experienced radio/TV
technician for help.
Wireless Radio Use: This device is restricted to indoor
use when operating in the 5.15 to 5.25 GHz frequency
band. Cet appareil doit être utilisé à l’intérieur.
Canadian Compliance Statement
Complies with the Canadian ICES-003 Class B
specications. Cet appareil numérique de la
Classe B est conforme à la norme NMB-003 du
Canada. This device complies with RSS 210 of
Industry Canada. This Class B device meets all the
requirements of the Canadian interference-causing
equipment regulations. Cet appareil numérique de la
Classe B respecte toutes les exigences du Règlement
sur le matériel brouilleur du Canada.
This device complies with Industry Canada license-
exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not
cause interference, and (2) this device must accept
any interference, including interference that may
cause undesired operation of the device.
Cet appareil est conforme aux normes CNR exemptes
de licence d’Industrie Canada. Le fonctionnement
est soumis aux deux conditions suivantes : (1) cet
appareil ne doit pas provoquer d’interférences et
(2) cet appareil doit accepter toute interférence,
y compris celles susceptibles de provoquer un
fonctionnement non souhaité de l’appareil.