Owner`s manual

o INTRODUCTION
Before Read the section entitled "Things to Check"
You Start before you begin troubleshooting. You need the
information in that section to troubleshoot the
ImageWriter II effectively.
If the suggestions in "Things to Check" do not correct a
problem, run the self-test (see Section 1, Basics).
How to Use First find the symptom that most nearly describes the
the Symptom problem; then perform the first corrective action on the
Charts solution list. If that corrective action does not fix the
problem, go to the next one. If you replace a module
and find that the problem remains, reinstall the
original module before you go on to the next
action.
If the symptoms displayed by the ImageWriter II are not
listed in the symptom charts, or if the system is not
displaying a clearly defined problem, use the "Flow
Chart" section.
3.2 / Troubleshooting rev. Aug 87 ImageWriter II