Owner`s manual

8. Locate the small black grounding wire. Solder the
wire to the metal plate on the paper empty frame, or
replace the screw (Figure 40, #4).
9. Position the paper guide and replace the two screws
that hold it (Figure 40, #5).
10. Replace the paper bail assembly (Figure 40, #6).
11. Replace the left and right support legs .
12. Replace the print head .
13. Replace the top cover .
14. Replace the tractor cover.
15. Perform the self-test .
ImageWriter II rev. Aug 87 Take-Apart / 2.51