Owner`s manual

METAL FRAME
RIGHT SIDE
1
2
FIGURE 38
3. Position the platen bushing (Figure 38, #1) into the
frame on the right side of the printer. Slide the free
lever (Figure 38, #2) onto the bushing.
4. Slide the right side of the platen shaft into the bushing
and lever (Figure 39, #1). Line up the tab on the
paper-empty frame with the notch in the plastic frame
(Figure 39, #2). Drop the left side into place (Figure
39, #3).
METAL FRAME
METAL FRAME
1
2
3
FIGURE 39
ImageWriter II rev. Aug 87 Take-Apart / 2.49