Owner`s manual

o PLATEN AND PLATEN ASSEMBLY
Materials Required Pin punch (1/16 inch)
Soldering iron, solder sucker, and solder
Remove 1. Remove the tractor cover.
2. Remove the top cover.
3. Remove the print head .
4. Remove left and right support legs .
5. Remove the paper bail assembly screws
(Figure 34, #1).
6. Remove the two screws (Figure 34, #2) that hold the
paper guide in place. Lift the paper guide out of the
machine.
2
1
3
4
5
6
7
A
B
FIGURE 34
2.46 / Take-Apart rev. Aug 87 ImageWriter II