Owner`s manual

 Apple T echnical Procedures
ImageWriter II
Section 5 – Additional Procedures
• CONTENTS
5.2 Shims
5.2 Materials Required
5.3 Check the Gap
5.4 Install
5.5 Remove
5.6 Paper Sensor and Logic Board Compatibility
5.6 Identification
5.6 Logic Boards
5.8 Optical Sensor Kit Assembly
5.8 Materials Required
5.8 Disassembly
5.18 Reassembly–Part 1 Optical Assembly
5.20 Reassembly–Part 2 Logic Board Modification
5.23 Reassembly–Part 3 Remaining Printer Parts
Note: If a step is underlined, detailed instructions for that
step can be found in T ake-Apart.