User`s manual
proportional spacing.
Important!
The new printer driver is an AppleWorks Custom Printer. You can have only one such custom printer on
your AppleWorks program disk at a time. If you want to keep more than one custom printer, you must
make a copy of the program disk to hold each custom printer. Further, you can have only three printer
drivers on a single disk.
Follow these steps.
With the AppleWorks Main Menu on your screen, choose option 5, Other Activities Menu.
Choose option 7,Specify information about your printer(s)
From the Printer Information menu, choose option 2,Add a printer.
Add a Printer Display
Disk: Drive 1 ADD A PRINTER Escape: Printer Information
_____________________________________________________________________________
_ ___________________________ | Main Menu
|_____________________________________ | _________________________
| | | Other Activities
|___________________________________|__ | | __________________________
| | | | Printer Information
|___________________________________|__ | | | __________________________
| | | | | Add a Printer
|___________________________________|__ | | | | Identify your printer, or a
compatible series | | | | |
| | | | | 1. Apple Dot Matrix 9. Qume
Sprint 5 | | | | | 2. Apple Imagewriter 10. Qume Sprint 11
| | | | | 3. Apple Daisy Wheel 11. Apple Scribe
| | | | | 4. Apple Silentype 12. Custom printer | | |
| | | | | | |
5. Epson MX series | |__| | |
6. Epson MX/Graftrax+ | | | | 7.
Epson RX series | |__| | 8.
Epson FX series |
|__|_________________________________________________________________|
_____________________________________________________________________________
_ Type number, or use arrows, then press Return 30K Avail.
Too Many Printers?
If you have three printers on your program disk, select the Remove command and remove one printer (not
the ImageWriter II) and then add your new printer.
From the Add a Printer menu, choose option 12,Custom printer. ^
Respond to the request for a name by typingSuperSub (or whatever name you prefer) and press Return.
Unless you have your printer interface card in a slot other than slot 1, choosePort 1 for access.
Follow the prompts at the bottom of the screen to answer the questions on the Add a Printer menu:
No to Line feed.
Yes to top-of-page.
No to stop at the end of each page, unless you’re using single sheets.