User`s manual

150 V 182 6 214 246 v
151 W 183 7 215 247 w
152 X 184 8 216 248 x
153 Y 185 9 217 249 y
154 Z 186 : 218 250 z
155 [ 187 ; 219 251 {
156 \ 188 < 220 252 |
157 ] 189 = 221 253 }
158 ^ 190 > 222 254 ~
159 _ 191 ? 223 255 Blot
Appendix C: ImageWriter II Printer and Interface Specifications
Printer Specifications
Print Method: Dot matrix, logic seek (line by line)
Printing Speed: ?Draft max ?250 cps 10 cpi
?Correspondence max ?180 cps 10 cpi
?NLQ max ?45 cps 10 cpi
Character Format:
Standard characters
Up to 7 dots wide by 8 dots high
Draft characters
Up to 12 dots wide by 8 dots high
NLQ characters
Up to 16 dots wide by 16 dots high
Custom (down loaded) characters
Up to 16 dots wide by 8 dots high
Standard:96 ASCII (alphanumeric and symbols)
28 European language characters
32 MouseText characters
Vertical Dot Spacing: 1/72 of an inch
Printed Line Length: 8 inches maximum
Horizontal Pitches: Charactersper Inch Charactersper Line Dotsper Inch (Approx.)
17 136 136
15 120 120
13.4 107 107
12 96 96
10 80 80
972 72
Proportional-1 variable 160
Proportional-2 variable 144
Paper Feed Direction: Forward and reverse
Line Spacing: 1/144 to 99/144 of an inch, selectable in increments of 1/144 of an inch
Line Feed Speed: ?Max. 24 lps 6 lpi
Paper Width: 3.5 to 9.5 inches pin to pin (pin feed), 10 inches maximum