Specifications

Troubleshooting Symptom Charts /Preliminary Check - 2
Symptom Charts
Preliminary Check
Error light blinks 1 Verify that paper cover is secure.
2 Verify that paper cover magnet is in place.
3 Try known-good software.
4 Verify that option card dip switch SW2-4 is open/off with
no card installed.
Select light off, error
light on
1 Add paper or reset paper feed tray.
2 Verify that paper-out sensor works correctly (see Take
Apart).
Select light does come
on
1 Verify that paper cover is secure.
2 Verify that paper cover magnet is in place.
3 Verify that operation cable under top cover is secure.