User Guide

iMac (USB 2.0) Take Apart -

Chassis (Faraday Cage)

3. Pull the outer shell (with Faraday attached) away from the neck.Note: There is no

need to remove the outer shell from the Faraday unless you are replacing the antenna

or the outer shell. If you are removing the shell from the Faraday cage, go on to the

next step.

4. Perform the next step only if you are replacing the Faraday, the antenna, or the outer

shell.

5. Remove one screw in the base of the Faraday cage to separate the shell from the

Faraday cage. Note: The Faraday cage on the 20-inch iMac (USB 2.0), 922-6204, is

heavier and different from the Faraday cage used on the 15-inch and the 17-inch iMac

(USB 2.0) computers.