User Guide

26 - iMac (USB 2.0) Take Apart

Logic Board

Tools

This procedure requires the following tools:

• Phillips #2 screwdriver (for the plastic screw)

• Torx-15 screwdriver

Part Location

Note: The battery, RJ-11 board, AirPort Extreme card, modem, I/O port covers, memory

(on the top and the bottom of the logic board), Bluetooth board and the Bluetooth

extension cable need to be removed from the logic board before returning the board to

Apple for service.

Preliminary Steps

Before you begin, do the following:

• Position the computer in the service stand.

• Remove the user access plate.

• Remove the bottom housing.

• Remove the RJ-11 board.