User Guide

134 - iMac (USB 2.0) Take Apart
Neck Assembly, 15" Display
• Remove the plastic cable retainer (under the fan).
• Remove the cap spoke holder.
• Remove the blind mate connector screws.
• Remove the Faraday cage.
• Remove the flat panel display.
• Remove the panel shield.
• Remove the back cover
Procedure
The neck assembly (661-2969) for the 15-inch iMac (USB 2.0) computer is shown below. It
can be identified by the part number on the TMDS cable (circled). The part number should
read 620-2384.