Manualshelf

User Guide

ManualsBrandsApple ManualsOtherimac usb2
131132133134135136137138139140
iMac (USB 2.0) Take Apart - 123
Back Cover, 20" Display
3. Remove the last screw and gently feed the neck cables through the hole. Note: If the
iMac is laying in the repair fixture, support the base of the computer when removing
the screw shown below. This screw holds the neck to the back cover and the computer
is unbalanced when the panel is removed.
4. Align the TMDS connector with the notches and carefully feed the cable through the
hole.