User Guide

iMac (USB 2.0) Take Apart - 99
Display, 17" Flat Panel
7. Remove four screws that connect the LCD display panel to the display bezel. Also,
remove the kapton tape to release the inverter cables on the left side, and the LED
and microphone cables from the bottom edge of the LCD display.
8. Lift the display panel out of the display bezel.
9. Remove the inverter from the display if you are returning the flat panel display to
Apple. Refer to the “Inverter, 17" Display” take apart procedure in this chapter for
instructions.
Replacement Note: If you are replacing the display, be sure to install the display
shield and EMI gaskets (076-0958) that come with the new LCD panel. Installation
instructions are included with the new display panel.