User Guide

94 - iMac (USB 2.0) Take Apart
Display, 20" Flat Panel
3. Attach the EMI gasket to the bottom of the display panel (as shown). Repeat for the
top of the display panel.
4. Attach the three gaskets to the side of the panel. Repeat for the other side.
5. Screw the panel to the rear display housing. Connect the panel cables (not shown).
Place the black mylar tape over the TMDS cable (not shown) to hold it securely in
place.
6. Reassemble the rest of the panel. Test the unit before returning it to the customer.