Specifications
Table Of Contents
- iMac (Early 2006 17-inch)
- Contents
- Take Apart
- General Information
- Access Door
- Memory
- Front Bezel
- Camera Board
- Lower EMI Shield
- IR Board
- AirPort Extreme Card
- Battery
- LCD Display
- LVDS Display Cable
- Inverter
- Speakers
- Bluetooth Card
- Optical Drive
- Hard Drive
- DC-DC Board
- Power Supply
- Logic Board
- CPU Fan
- Optical Drive Fan
- Hard Drive Fan
- AC Line Filter
- Ambient Light Sensor Board
- Clutch
- AirPort Antenna
- Bluetooth Antenna
- DC Power Cable
- Camera Cable
- Chassis
- Rear Housing
- Troubleshooting
- Views
iMac (Early 2006 17-inch) Take Apart — Power Supply
Removing the Power Supply
Using a T10 torx screwdriver, remove the three self-tapping screws from both top corners
and the lower left corner of the DC-DC board. Then remove the machine screw from the
lower right corner of the board.
Replacement Note: When installing the mounting screws in the power supply, install the
machine screw rst in the lower right corner of the power supply. Then install the three self-
tapping screws.
1.