Specifications
Table Of Contents
- iMac (Early 2006 17-inch)
- Contents
- Take Apart
- General Information
- Access Door
- Memory
- Front Bezel
- Camera Board
- Lower EMI Shield
- IR Board
- AirPort Extreme Card
- Battery
- LCD Display
- LVDS Display Cable
- Inverter
- Speakers
- Bluetooth Card
- Optical Drive
- Hard Drive
- DC-DC Board
- Power Supply
- Logic Board
- CPU Fan
- Optical Drive Fan
- Hard Drive Fan
- AC Line Filter
- Ambient Light Sensor Board
- Clutch
- AirPort Antenna
- Bluetooth Antenna
- DC Power Cable
- Camera Cable
- Chassis
- Rear Housing
- Troubleshooting
- Views
iMac (Early 2006 17-inch) Take Apart — DC-DC Board
Replacing the DC-DC Board
Position the DC-DC board and install the long black self-tapping screw in the lower right
corner, and the screw in the top right corner.
Connect the DC power cable and the power supply cable to connectors on the DC-DC board.
Replace the display panel.
Replace the lower EMI shield.
Replace the front bezel.
Replace the memory access door.
1.
2.
3.
4.
5.
6.