Specifications
Table Of Contents
- iMac (Early 2006 17-inch)
- Contents
- Take Apart
- General Information
- Access Door
- Memory
- Front Bezel
- Camera Board
- Lower EMI Shield
- IR Board
- AirPort Extreme Card
- Battery
- LCD Display
- LVDS Display Cable
- Inverter
- Speakers
- Bluetooth Card
- Optical Drive
- Hard Drive
- DC-DC Board
- Power Supply
- Logic Board
- CPU Fan
- Optical Drive Fan
- Hard Drive Fan
- AC Line Filter
- Ambient Light Sensor Board
- Clutch
- AirPort Antenna
- Bluetooth Antenna
- DC Power Cable
- Camera Cable
- Chassis
- Rear Housing
- Troubleshooting
- Views

iMac (Early 2006 17-inch) Take Apart — Bluetooth Card
Remove the Bluetooth Card
Using a T6 torx screwdriver, remove the mounting screws from Bluetooth card and gently
disconnect the Bluetooth antenna from the connector on the card.
Lift the Bluetooth card straight up and o the logic board connector.
Replacing the Bluetooth Card
Connect the card to the logic board.
Attach the Bluetooth antenna to the Bluetooth card.
Replace the two T6 screws on the Bluetooth card.
Connect the speaker cable connector to the logic board,
Secure the right speaker with the smaller of the two mounting screws.
Secure the left speaker with the longer of the two mounting screws.
Replace the display panel.
Replace the EMI shield.
Replace the front bezel.
Replace the access door.
1.
2.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.