Specifications

iMac (Early 2006 17-inch) Take Apart — LVDS Cable 56
Pinch together the connector locking levers, and disconnect the LVDS cable connector.
Replacing the LVDS Cable
Position the LVDS cable on the back of the display panel as shown in the Part Location photo
above.
Connect the LVDS cable connector. When connected correctly the locking levers will secure
the connector and it cannot be disconnected without depressing the levers.
Secure the LVDS cable to the panel with four strips of tape.
Replace the display panel.
Replace the lower EMI shield.
Replace the front bezel.
Replace the access door.
2.
1.
2.
3.
4.
5.
6.
7.