Specifications

Table Of Contents

iMac (Early 2006 17-inch) Take Apart — Front Bezel 25

This picture shows how the access tool works. Pushing the tool up the vent on the rear cover

releases the latches on the inside of the front bezel. Refer to the next step for the procedure.

Start on the left side (looking from the back of the unit). As you insert the card to disengage

the latch, squeeze the top of the bezel, that will help take pressure o of the latch and

enable it to open easier. As the bezel releases, pull the bezel away from the rear housing.

Note: If the bezel won’t open, try cutting the card lengthwise into 3/4 inch or 1.5 cm strips.

Insert the card again, on a 45º angle, aimed toward the outer corner, and try again.