Specifications
Table Of Contents
- iMac (Early 2006 17-inch)
- Contents
- Take Apart
- General Information
- Access Door
- Memory
- Front Bezel
- Camera Board
- Lower EMI Shield
- IR Board
- AirPort Extreme Card
- Battery
- LCD Display
- LVDS Display Cable
- Inverter
- Speakers
- Bluetooth Card
- Optical Drive
- Hard Drive
- DC-DC Board
- Power Supply
- Logic Board
- CPU Fan
- Optical Drive Fan
- Hard Drive Fan
- AC Line Filter
- Ambient Light Sensor Board
- Clutch
- AirPort Antenna
- Bluetooth Antenna
- DC Power Cable
- Camera Cable
- Chassis
- Rear Housing
- Troubleshooting
- Views
iMac (Early 2006 17-inch) Take Apart — Clutch 111
Replace the Clutch
Make sure the stand is erect and the end of the stand is inserted through the mounting hole
in the rear housing.
Position the clutch on the stand as shown, with the springs at bottom right. Install the four
long, clutch-to-stand mounting screws..
Adjust the clutch so that its chassis mounting holes align, and install the four machine
screws that secure the clutch to the chassis.
Replace the hard drive.
Replace the hard drive fan.
Replace the optical drive fan.
Replace the logic board.
Replace the CPU fan.
Replace the speakers.
Replace the display panel.
Replace the IR Board.
Replace the lower EMI shield.
Replace the front bezel.
Replace the memory access door.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.