Specifications

iMac G5 (17-inch iSight) Take Apart — Logic Board 81
Connect the power supply cable to the connector on the underside of the logic board.
Pull all cables up and away from the logic board bay and gently place down the logic board
so that all screw holes are aligned with screw mounts in the chassis.
Replacement Note: The logic board should rest on the screw mounts without any binding
or bowing—if it doesn’t, adjust any cables that are interfering with the logic board.
Before securing the logic board, connect the camera board cable to its connector on the
right side of the logic board.
Secure the logic board by installing four machine screws, and then installing three self-
tapping screws.
Connect the AirPort and Bluetooth cables to connectors on the combo card.
Note that the cables can be connected to either connector on the combo card.
Connect the combo card and install two mounting screws.
Connect seven cables to connectors on the logic board as indicated in the removal step
above.
Connect the optical drive ex cable and secure it with the ex cable mounting clip and
screw.
Replace the CPU fan.
Replace the speakers.
Replace the display panel.
Replace the IR Board.
Replace the lower EMI shield.
Replace the front bezel.
Replace the memory access door.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.