Specifications

iMac G5 (17-inch iSight) Take Apart — DC-DC Board
Using a T10 torx screwdriver, remove the two self-tapping screws from the bottom corners of
the DC-DC board. The lower left mounting screw is beneath the power supply cable.
Using a T10 torx screwdriver, remove the machine screw from the upper right corner of the
board. Lift the board straight up to remove it.
Replace the DC-DC Board
Position the DC-DC board and install the machine screw in upper right corner
Install the long black self-tapping screw in the lower right corner, and the medium-length,
silver self-tapping screw in the lower left corner.
Connect the DC power cable and the power supply cable to connectors on the DC-DC board.
Replace the display panel.
Replace the lower EMI shield.
Replace the front bezel.
Replace the memory access door.
2.
3.
1.
2.
3.
4.
5.
6.
7.