Specifications

iMac G5 (17-inch iSight) Take Apart — Front Bezel 25
Check and make sure no EMI tape interferes with the locking mechanisms when the bezel is
installed onto the unit. The locking mechanisms must slide into a gap inside the top edge of
the rear housing.
Potition the front bezel around the edges of the unit, push in the memory eject rings, and
press the bezel onto the rear housing.
Note: When pressing the top of the bezel rmly onto the housing you should audibly hear
the locking mechanisms latch onto the housing.
Install the three bezel mounting screws.
Replace the access door.
3.
4.
5.
6.