Specifications

iMac G5 (17-inch iSight) Take Apart — Access Door & Memory 18
Replace the Memory and Access Door
Grasp the memory module by its edges and insert it into the memory slot as shown below.
Push the edge of the memory module in gently to lock it in place.
Replacement Note: The memory module ts into the slot only one way. When inserted fully,
you should hear a slight click and the two pull rings should retract a bit. Do NOT insert the
memory by pushing in the pull rings.
Position the access door on the rear housing. Lift the stand out of the way and tighten the
two captive mounting screws.
1.
2.