Specifications

iMac G5 (17-inch iSight) Take Apart — Chassis 112
Using a T10 torx screwdriver, remove 10 self-tapping screws from the chassis, and remove the
chassis from the rear housing.
Replace the Chassis
Position the chassis on the rear housing as shown and install 10 self-tapping mounting
screws.
Replace the foam cushion on the chassis where shown in the photo above.
Replace the AC power inlet.
Replace the power supply.
Replace the DC-DC board.
Replace the hard drive.
Replace the optical drive.
Replace the hard drive and optical drive fans.
Replace the logic board.
Replace the CPU fan.
Replace the speakers.
Replace the display panel.
Replace the IR Board.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.