Technical information

18
How do I add memory and an AirPort Card?
For detailed instructions, refer to Mac Help (see page 20).
Before installing:
m shut down the computer
m unplug all cables, except the power cord
m place the computer face down on a soft cloth
1
Open the access door using
a coin to turn the latch.
2
Touch the metal shield inside
the recessed latch area. Then
unplug the power cord.
. Touch this metal before you touch
any parts inside the computer. Don’t
walk around the room until you’ve
finished installing memory or an
AirPort Card.
3
To install memory, insert
a memory module into one of
the two lower slots.
. Be sure to align the notches on the
module with the small notches inside
the slot.
4-0938.UMpos 9/28/99 1:51 PM Page 18