Specifications

Procedure
1. Unplug all cables from the computer except the power cord.
2. Important: To avoid electrostatic discharge, always ground yourself by touching
metal before you touch any parts or install any components inside the computer. To
avoid static electricity building back up in your body, do not walk around the room until
you have completed the installation and closed the computer.
3. Touch a metal surface inside the computer to ground yourself.
4. Unplug the power cord.
5. Disconnect the AirPort antenna and pull the plastic tab to remove the card from the
slot.
6 iMac (Flat Panel) Take Apart
AirPort Card