Specifications

5. Raise the display to disconnect the circled items: the antenna, the inverter cable, the
microphone, and the power on LED. Then, peel the tape away from the video
connector and carefully pry the video cable clip open to release the video cable (see
next page for a close up of the clip). Pry the ferrite bead from the side or from the
back. The ferrite bead is fragile and could break if a screwdriver is placed in the middle
of the ferrite bead and used as leverage to remove the bead. Note: View this page at
a larger size to enlarge the graphic.
78 iMac (Flat Panel) Take Apart
Display, Flat Panel