Specifications

Memory, SO-DIMM (user-
installable)
Tools
No tools are required for this procedure.
Part Location
Note: The user-installable memory slot is identified as Slot J12 by Apple Hardware Test
and Apple System Profiler.
Preliminary Steps
Before you begin, do the following:
• Position the computer in the service stand.
• Remove the user access plate.
Note: There are two RAM expansion slots on the computer. One slot (top of the logic
board) accepts the factory-installed standard PC-133 168-pin DIMM. The other slot
(bottom of logic board) accepts a standard PC-133 144-pin SO-DIMM and is accessible
on the bottom of the computer. Only the SO-DIMM slot is accessible by the user.
Memory, SO-DIMM (user-installable)
iMac (Flat Panel) Take Apart - 7