Specifications

iMac (17-inch Flat Panel, 1GHz) Take Apart -

Chassis (Faraday Cage)

3. Pull the outer shell (with Faraday attached) away from the neck.Note: There is no

need to remove the outer shell from the Faraday unless you are replacing the antenna

or the outer shell. If you are removing the shell from the Faraday cage, go on to the

next step.

4. Note: Perform this step only if you are replacing the antenna or the outer shell.

Remove one screw in the base of the Faraday cage to separate the shell from the

Faraday cage.