Specifications

3. Turn logic board over and remove the Wi-Fi/Bluetooth card by pulling the card straight out of its receptacle.
4. Using a black stick, gently remove thermal material off the logic board and wireless card. Wipe areas clean with IPA wipe.
Wireless Card Installation
1. Locate burstable twinpak of thermal material - Part # 076-1425. Wear protective gloves.
2. Using a black stick, push thermal material from one side of twinpak sleeve to the other side of twinpak sleeve.
3. Continue pushing the material with the black stick to burst the twinpak in the middle. Push the white material into the black material.