User Guide

iMac (Early 2006 20-inch) Take Apart —Logic Board 94
Replacing the Logic Board
Position all the logic board cables out of the way so the logic board can be placed into the
rear housing.
As you lower the board into the rear housing, make sure the memory levers are lowered
through the access door opening and the logic board screw holes line up with the board..
At the top of the heatsink, replace the two screws attaching the logic board support bracket
to the chassis. Note: The support brackets (clips) must be removed and transferred to the
new logic board, if replacing the logic board.
1.
2.
3.