User Guide

iMac (Early 2006 20-inch) Take Apart — Front Bezel 29
Removing the Front Bezel
Position unit on rear cover with the stand facing you.
Tilt up the front bezel and remove four screws along the bottom.
Warning: The ambient light sensor is located in the second hole from the right. Don’t
mistake the ambient light sensor for a screw. Sticking a screwdriver or other sharp object in
the ambient light sensor could damage the computer.
Locate the access card. Bending the upper quarter of the access tool card will help engage
the latch. Note: Refer to Access Tool Modication in the General Information chapter if the
bezel is dicult to open.
1.
2.
3.