User Guide

iMac (Early 2006 20-inch) Take Apart — Memory 25
Removing the Memory
After removing the access door, touch the metal frame around the memory compartment to
discharge any static electricity from your body.
Important: Always discharge static before you touch any parts such as the memory board.
To avoid generating static electricity, do not walk around the room until you have nished
replacing the memory.
Pull the two levers in the memory compartment toward you. If a memory module is installed
in the slot, pulling the levers will dislodge it. Note: The levers are used to remove memory
not to install memory. Always install memory my hand.
a
Set the memory module aside.
1.
2.
3.