User`s manual

for your particular printer.

The GRAPPLER DIP switch is comprised of four small

switch handles that can be selected to ON or OFF. To set the

DIP switch, use a pen or similar pointed object to change the

handle direction depending on your program, set the DIP

switch to either of the following modes:

1. ImageWriter Emulation Mode. If your program is

written only for the Apple or the Apple

DMP printer, set the Grappler DIP switch in the

ImageWriter Mode according to your specific printer

shown below:

ImageWriter Mode GRAPPLER DIP Switch Settings

DIP Switch Handles

B & W PRINTERS A B C D

Brother 1109 ON OFF OFF OFF

Brother l209, 1509, 1709 ON ON OFF ON

Centronics PS210, P5220 ON ON OFF ON

C. itoh ProWriter Jr. Plus ON ON OFF ON

C. itoh ProWriter OFF OFF ON ON

Citizen 120D ON ON ON ON

Citizen MSP-10, MSP-15E, MSP50 ON ON OFF ON

Diconix 300W ON ON OFF ON

Epson FX-80,100, FX+ and compatibles ON ON OFF ON

Epson RX and compatibles ON ON OFF OFF

Epson LX ON OFF OFF OFF

Epson MX ON ON ON OFF

IBM ProPrinter OFF ON OFF OFF

NEC 8023 OFF OFF ON ON

Okidata 192,193 (NOT IBM versions)* OFF ON OFF ON

Panasonic 1080i, 1091i Series ON ON OFF OFF

Star Gemini Series: SG, SD, SR, 10X ON OFF OFF ON

COLOR

PRINTERS A B C D

Epson EX, JX ON ON OFF ON

C.itoh C3150 ON ON OFF ON

Facit B3l00, B3150 ON ON OFF ON

Okidata 292, 293 (NOT IBM versions)** OFF ON OFF OFF

* PRINTER must be set for 8 bit graphics

** May exhibit vertical page displacement, For best results,

use Oki 192 settings when not printing in color.

If your printer is not listed, try the Epson FX setting. If this

fails, contact your printer manufacturer for compatibility.