Operating instructions

Interface • Bluetooth® wireless technology
9
GeBE E + F GmbH • www.oem-printer.com • GeBE Doc. No.: SMAN-E-689-V1.1 • Thermal Printer GPT-4378-FLASH-70-iBT
Bluetooth
®
specification
radio transmission level
range
profile
printer power consumption
V1.1
4 dBm (class 2)
app. 10 -15 m
SPP serial port profile
no printing I (mean)
active link / data traffic at 115 kbit/s - closed range (slave)
active link / no data traffic - closed range (slave)
33 mA
10 mA
I (peak)
61 mA
56 mA
Idle / no active link / page&inquiry scan interval 1.28 sec.
Sniff mode / 1.25 sec. scan interval
8 mA
21 mA
Power off
´
0.3 µA
56 mA
78 mA
0.7 µA
The GeBE-FLASH
®
for iOS meets the BT specification
V1.1 class 2, attaining a transmission range of about
10-15 m. If you require a longer transimission range,
please contact us.
Operation
The printer responds to an inquiry scan with its name
"GeBE-FLASH" and its BT address. The online power
consumption of the printer with an active BT link is
about 33 mA.
The BT-Modul supports the BT sniff mode. In this
mode, the printer scans its environment for possible
calls every 1.25 seconds. During these inquiry scans, it
remains visible and responsive.
The power consumption in this mode is about 21 mA.
When the printer is reactivated through the feed button,
the BT tranceiver will remain in sniff mode. The power
consumption in this mode is about 8 mA.
If you are not planning to operate the printer for several
days, switch it off with the OFF/NEXT key. After the
power is turned on, it will take a minimum of 10
seconds for the printer to become ready to receive
data.
Should your transmitter require a PIN number, type in
"0000".
iOS-Framework
- GeBE-Framework from GeBE
- EA-DEMO from Apple Development Center
Please ask us.
CE statement:
The BlueRS+I complies with the European safety regulations EN 60950,
and EMV regulations EN 300 328 V1.7.1 and EN 301 489 -1 and -17.
FCC statement:
The printer contains a BlueRS+I OEM serial adapter with the FCCID: T7V-BC06 / IC: 216Q-BC06.
The BlueRS+I complies with part 15 of the FCC rules and with RSS-210 of Industry Canada.
The BlueRS+I has been qualified as a product in accordance with the Bluetooth
®
Qualification Program (BQP).
This printer contains a 2.4 GHz radio transmitter. For health reasons, a distance of at least 1.0 cm
must be kept between the printer surface and the body of the user, except hands, fists, feet, and
joints. As a precaution, any body contact during operation should be kept to a minimum.
8.1 Bluetooth® wireless technology
8 Interface