Operating instructions

GeBE E + F GmbH • www.oem-printer.com • GeBE Doc. No.: SMAN-E-689-V1.1 • Thermal Printer GPT-4378-FLASH-70-iBT
Safety Instructions
5
4 Safety Instructions
Safe operation of this device is only warranteed, if the instructions in this operating manual have
been complied with. For installation: Always disconnect system power supplies!
Only use manufacturer's parts and accessories!
• The device may only be opened or repaired by
authorized personal. Never open the device or carry
out repairs yourself. Always contact an authorized
technical servicer. You can find all necessary service
information in the chapters "Service".
• Before the device is turned on, make sure that the
system voltage of your installation matches the
supply voltage of the device.
The device characteristics are printed on the name
plate which is located on the underside of the
device. For the technical data of the device, refer to
the chapter "Technical Data".
• The peripheral devices that are connected to the
interfaces and the DC circuits of this device have to
meet the requirements for safety extra-low voltage
(SELV) in accordance with EN/IEC 60950.
• Switching off the device does not completely
disconnect it from the power supply. Your device is
only disconnected completely, when the power plug
is unplugged.
• Please make sure that the power supply cable is run
in a way that nobody trips over it, and it cannot be
damaged by other devices.
• During operation, surfaces in the surrounding area
of the print head may heat up. Therefore, direct
contact with the print head must be avoided to
prevent burning accidents.
Do not put heat sensitive objects close to this heat
source.
• Avoid constant high humidity and condensation.
Protect the device from being splashed and from
getting in contact with chemicals.
• Only use spare parts and accessories supplied or
authorized by GeBE. The use of unauthorized parts or
accessories may affect the function and safety of the
device. All parts included are listed in the chapter
"Packing List", while the original accessories are listed
in the chapter "Accessories and Spare Parts".
• It is no longer possible to safely operate the device, if:
- the housing has been damaged.
- moisture reached the inside of the device.
- smoke is coming from the inside of the device.
- the power supply cord is damaged.
- the device stopped working properly.
Turn off the device immediately, when a failure occurs, as
mentioned above, and contact GeBE customer service.
See chapter "Service".
• We explicitly state that all product liability and
guaratee claims are null and void, if the device has not
been used in accordance with the instructions in this
operating manual or on the device itself!
• Risk of explosion in case of incorrect battery ex-
change.
• Please read how to safely exchange batterys in the
chapter "Exchanging batterys".
4.1 Symbols and their Meaning
Please read all safety instructions, marked with a , and important information, marked with a , very carefully!
Safety instructions regard your personal safety, and are to be adhered to at all times.
It is essential to forward these instructions to all other personal using this device.
Important information refers to equipment safety, preventing you from damaging your device.
The adherence of all instructions, as well as the appropriate application and use in accordance with the ope-
rating instructions are binding for the product liability and the product warranty.
Attempts by the customer to repair the device make all warranty claims null and void.
If you have technical questions, please contact GeBE Technical Support.
Instructions marked with a require consultation with GeBE Technical Support.
Tips are marked with a and will help you to utilize your printer to its fullest.
Documents or Internet links are marked with a , referring to more detailed or additional information.
4.2 Safety Instructions