User`s guide

Setting manual answer at the program level
Turn auto-answer off in a program if you need to handle
incoming calls manually.
The following table tells you how to set manual answer in
the various programs that work with modem software.
TYPE OF PROGRAM HOW TO SET MANUAL ANSWER
Terminal emulators Set the program’s S0 register to 0 to
turn off auto-answer. To answer a call
manually, issue the ATA command.
See the program’s user’s guide for
information on setting the S0 register,
or use the AT commands listed in the
Apple Telecom AT Command Set
guide.
Apple Remote Access Apple Remote Access must be set to
and other servers auto-answer.
Apple Fax Set Fax Answering to Off in the Apple
Fax window. See the Apple Fax User’s
Guide for information about
answering a fax call manually.
54
Chapter 5