User Guide

74 - Power Mac G4 Cube Take Apart
Processor Card
Replacement Note: Make sure the three processor standoffs are in place on the
logic board before installing the new processor card.
2. Using a jeweler’s flat-blade screwdriver, release the two heat spreader metal clips
from the processor card and remove the heat spreader from the card.
3. Install the heat spreader on the replacement processor card, and reconnect the card
to the logic board. Ensure that all three processor standoffs are in place and the
processor is fully connected.
4. Reassemble and test the computer.
Warning: Never turn on the computer unless all of its internal and external
parts are in place and it is closed. Operating the computer when it is open or
missing parts can damage the computer or cause injury.