User Guide

Power Mac G4 Cube Take Apart - 65

Logic Board

Tools

This procedure requires the following tools:

• Torx T10 screwdriver

• Jeweler’s flat-blade screwdriver

Preliminary Steps

Before you begin, remove the following:

• Computer core from enclosure

• Video card and video riser card

• Modem board

• Memory card

• Top plate assembly

• DC-to-DC board

Procedure

1. Place the computer core on its side so the logic board is on top and the memory card

slots are on your left. Using a Torx T10 screwdriver, remove the two screws at the end

of the board.