User Guide

Power Mac G4 Cube Take Apart - 55

NMI Board

Tools

This procedure requires the following tools:

• Torx T10 screwdriver

• Black stick (or other nonconductive nylon or plastic tool)

Preliminary Steps

Before you begin, remove the following:

• Computer core from enclosure

• Top plate assembly

• Video card and video riser card

• Memory card

Procedure

1. Place the computer core on its base so the heatsink faces up. Remove the screw that

attaches the NMI switch board to the chassis.

2. Push in on the plastic hooks one at a time, and lift the board off of the button panel.