User Guide

Power Mac G4 Cube Take Apart -
21
Top Plate Assembly with Power Button Gasket
Top Plate Assembly with Power
Button Gasket
Tools
The only tool required for this procedure is a Torx T10 screwdriver.
Preliminary Steps
Before you begin, remove the computer core from the enclosure.
Procedure
1. Press the latch in, and turn over the core so the power button faces up.
2. Remove the four corner screws that secure the top plate to the four vertical posts.
3. Remove the four screws on the two sides. (The two screws that align with the vertical
plates are much longer than the other screws.)