User Guide

Power Mac G4 Cube Take Apart -

ATA Hard Drive

4. Push in the core latch, and reposition the computer chassis so you can access the

heatsink and hard drive.

5. Loosen, but do not remove, the three captive screws at the heatsink.

6. Lift up the loosened heatsink, and slide the hard drive out of the carrier.

7. Position the replacement drive on the drive carrier so that the ribbon cable and power

cable connectors align with the slots at the end of the carrier.

8. Lift up the heatsink, and slide in the drive.

9. Align the heatsink ﬁns to the opposite heatsink ﬁns. Tighten the three captive screws.

Screws

Hard Drive

Heatsink