User Guide

Power Mac G4 Cube Take Apart - 11
Memory (DRAM DIMM)
Memory (DRAM DIMM)
Tools
No tools are required for this procedure.
Preliminary Steps
Before you begin, remove the computer core from the enclosure.
Procedure
1. If provided, attach the grounding wrist strap included with the replacement memory.
2. Push down the ejectors on the slot of the DIMM you want to replace.
Note: The slot might have one or two ejectors.
3. Lift the DIMM out of the computer.
Warning: When removing or installing the DIMM, do not touch its connectors. Handle
the DIMM only by the edges.
Connectors
DRAM Slot
DRAM DIMM
Ejector