User Guide

Power Mac G4 Cube Take Apart - 9
AirPort Card
AirPort Card
Tools
No tools are required for this procedure.
Preliminary Steps
Before you begin, remove the computer core from the enclosure.
Procedure
1. Disconnect the coaxial antenna cable from the port on the end of the AirPort Card.
2. Pull the plastic tab on the end of the AirPort Card to release the AirPort Card from the
PCI card connector.
3. Insert the replacement AirPort Card through the opening in the PCI card guide and
into the connector on the logic board.
4 Carefully attach the coaxial antenna cable to the port on the end of the AirPort Card.
AirPort Card
Connector
AirPort Card
Antenna Port on
AirPort Card
Antenna
Cable
AirPort
Pull Tab